RS485 Wind Speed Meter/Sensor/Transmitter Wiki - DFRobot
网页A low-inertia anemometer is used to sense the wind speed. When the wind blows the wind cup to rotate, it drives the axle magnet to rotate through the shaft, then the accurate wind speed information can be obtained after calculation.
Measure Wind Speed with Ultrasonic Anemometer & Arduino
网页2023年9月3日 · The sensor can measure wind speed ranging from 0 to 40 m/s and wind direction from 0 to 360° with high accuracy. The anemometer operates on a low-power chip, consuming only 0.12W, making it suitable for solar or battery-powered installations. For interfacing, we will employ the RS485 protocol.
RS485 anemometer - NiuBoL
网页An RS485 anemometer is a type of anemometer that uses the RS485 communication protocol to transmit data. The RS485 protocol allows for long-distance communication and enables multiple devices to be connected on the same network.
RS485 Wind Speed Meter Sensor Transmitter (0~32.4m/s)
网页This wind speed sensor is a professional meteorological instrument used to measure horizontal wind speed within 0~32.4m/s. It integrates a hall sensor inside. The shell and wind cups are made of aluminum alloy material and use special mold precision die casting process, featuring small dimension tolerance and high surface accuracy.
Arduino UNO R3 / ESP8266 RS485 MODBUS Anemometer
网页2023年11月7日 · The anemometer will be a part of a bench of measures that will be added to the wind turbine MPPT regulator. This bench of measures will work with a ESP8266, for its Wi-Fi availability. For the moment, the objective is to find an easy way to implement RS485 on an Arduino Uno, then to adapt it to an ESP8266, the Wemos Lolin D1 mini for …
网页The anemometer is designed for measuring of wind resources for assessment reports and power curves. The sensor is characterized by minimal deviation from cosine line, optimized dynamic behavior even at highly
Anemometer RS485 (modbus) with Arduino - Sensors - Arduino Forum
网页2024年1月4日 · I have an Arduino Uno and an Anemometer wind direction sensor. My anemometer works in a DC 10-30V range. Its communication protocol is RS485 and the model is PR-3000-FXJT-NO1. Another piece of information that may be useful is that after finding out, I think I have to use an RS485 converter to …
网页PCE-WS RS485 Modbus has been designed to be used in industrial applications: cranes, solar panels, wind turbines, weather stations, greenhouses, irrigation systems... It is usually connected to process displays, PLC’s or dataloggers to display the wind speed and/or set alarms to predefined values or to
Anemometer PCE-WS RS485 - PCE Instruments
网页Robust Anemometer for fixed installation / various output signals /. for wind warning systems, building services and building automation. The Anemometer impresses with its compact design and various output signals.
philippedc/Arduino-ESP8266-RS485-MODBUS-Anemometer
网页2023年11月7日 · Here is a way to setup an anemometer that works with RS485 MODBUS communication protocol. The Anemometer will be a part of a bench of measures that will be added to the Wind Turbine MPPT Regulator. This bench of measures will work with a ESP8266, for its Wi-Fi availability.
- 某些结果已被删除